Picatinny Ring Mount | 34 mm | Screw

This mount is manufactured according to the NATO STANAG 2324 / MIL-STD-1913 standard (Picatinny). This means it is compatible with all standard Picatinny mounts, rings, and accessories – regardless of the manufacturer.

The Picatinny standard ensures that you can freely combine rails, mounts, and optics from different manufacturers. This gives you the flexibility to upgrade or change your scope without altering the mount.

Picatinny vs. Weaver:

Picatinny and Weaver look similar but are not the same. The difference lies in the recoil slots:
• Picatinny: Slots are 5.23 mm wide with a center-to-center distance of 10.01 mm (fixed standard)
• Weaver: Slots are 4.57 mm wide with variable spacing (no fixed standard)

In many cases, a Weaver mount can be attached to a Picatinny rail because the Weaver lug is narrower than the Picatinny slot. However, a Picatinny mount will NOT fit on a Weaver rail – the lug is too wide.

This mount is Picatinny and fits all rails manufactured according to MIL-STD-1913 / STANAG 2324.

See compatible mounts: Scope Mounts

This mount is made of steel. Steel is the classic choice and offers high rigidity and wear resistance. The material tolerates repeated mounting and dismounting without the contact surfaces deforming.

Steel is heavier than aluminium, but for a ring mount, the weight difference is practically minimal.

This assembly is blued. Bluing, also known as black oxidation, is a chemical surface treatment that provides a nice, matte black finish and a degree of corrosion protection. It is the most traditional surface treatment for firearm components.

Bluing is less resistant than QPQ and requires a little more care – a thin layer of oil after use in damp weather will keep the surface in good condition.

These rings have an internal diameter of 34 mm and fit scopes with 34 mm tubes. 34 mm is typically used on high-end scopes with a large adjustment range.

Always check your scope's tube diameter before purchasing – it can be found in the scope's specifications or easily checked with a caliper.

Installation is simple. The rings are attached to the Picatinny rail, and the scope is placed in the lower ring halves, after which the upper halves are tightened.

Manufacturer's recommendation:
• Torque for ring screws (top, M3.5): 1.8–2.0 Nm
• Torque for rail attachment (M4): 2.0–2.5 Nm
• Ensure the scope is level and has correct eye relief before final tightening

A torque wrench is necessary for proper installation. Overtightening can damage the scope's tube.

Scope mounting: Read the guide here

Rusan is a Croatian manufacturer with over 30 years of experience in precision mounts for rifles. All products are manufactured in-house on modern CNC machines from solid material – without casting or metal injection. Rusan is known for tight tolerances, high repeatability, and an exceptionally wide range of rings, mounts, and adapters for night optics.

Read more about Rusan here: Rusan

See all products from Rusan: Rusan collection