Picatinny Ring Mount | 36 mm | Quick Release

This mount is manufactured according to the NATO STANAG 2324 / MIL-STD-1913 standard (Picatinny). This means it is compatible with all standard Picatinny mounts, rings, and accessories – regardless of the manufacturer.

The Picatinny standard ensures that you can freely combine rails, mounts, and optics from different manufacturers. This gives you the flexibility to upgrade or change your scope without altering the mount.

Picatinny vs. Weaver:

Picatinny and Weaver look similar, but they are not the same. The difference lies in the cross slots (recoil slots):
• Picatinny: Slots are 5.23 mm wide with a center distance of 10.01 mm (fixed standard)
• Weaver: Slots are 4.57 mm wide with variable spacing (no fixed standard)

A Weaver mount can often be fitted onto a Picatinny rail because the Weaver lug is narrower than the Picatinny slot. However, a Picatinny mount will NOT fit on a Weaver rail – the lug is too wide.

This mount is Picatinny and fits all rails manufactured according to MIL-STD-1913 / STANAG 2324.

See compatible mounts: Scope Mounts

This mount is made from 7075-T6 aluminum – the same alloy used in military equipment, aircraft construction, and high-end climbing gear. 7075-T6 has a strength-to-weight ratio almost twice that of steel and is the preferred material among many professional shooters.

For the vast majority of hunters and shooters, 7075-T6 aluminum is at least as good as steel. The material is lighter, does not corrode, and will last for decades of use under normal conditions.

This assembly is anodized. Anodizing creates a protective oxide layer on the aluminum surface, providing good corrosion protection and a durable finish. Anodized products withstand daily use and are resistant to scratches and wear.

Hard anodizing (Type III) provides a thicker and harder layer than standard anodizing and is typically used on products subjected to extra heavy wear.

These rings have an internal diameter of 36 mm and are suitable for binoculars with 36 mm tubes.

Always check your binoculars' tube diameter before purchase – it can be found in the binoculars' specifications or easily checked with a caliper.

Installation is simple. The rings are attached to the picatinny rail, and the scope is placed in the bottom ring halves, after which the top halves are tightened.

Manufacturer's recommendation:
• Torque for ring screws (top, M3.5): 1.8–2.0 Nm
• Torque for rail attachment (M4): 2.0–2.5 Nm
• Ensure the scope is level and has correct eye relief before final tightening

A torque wrench is necessary for proper installation. Overtightening can damage the scope's tube.

Scope mounting: Read the guide here

Rusan is a Croatian manufacturer with over 30 years of experience in precision mounts for rifles. All products are manufactured in-house on modern CNC machines from solid material – without casting or metal injection. Rusan is known for tight tolerances, high repeatability, and an unusually wide range of rings, mounts, and adapters for night vision optics.

Read more about Rusan here: Rusan

See all products from Rusan: Rusan collection